| | En plaçant l'information dans LE SYSTEME D'INFORMATION FEDERAL FISinter, les producteurs étendent leurs possibilités logistiques, en présentant pour le jeu d'écritures les signes uniques, structurés et favorables (identificateurs) de leurs marchandises et leurs services aux contractants. |
La description des produits / des services - Scie circulaire,
est présentée dans la rubrique de FISinter indiquée au-dessous.
Entrez la rubrique et étudiez description détaillée des marques existantes et des modifications des produits / des services - Scie circulaire.
-
Les machines-outils, les outils et les dispositifs
- Scie circulaire C6-2K
General-purpose. For longitudinal, crosscutting and saw under
boards angle, square sawn timbers, furniture boards and so forth saw-timbers. - Scie circulaire C8D-80
For sawing with the grain of saw-timber on blanks, box board etc.. - Scie circulaire CM-150K
For rectilinear sawing with the grain of board and batters in sawmill
and woodworking productions. - Scie circulaire CM150K
For sawing with the grain 2, 3 and 4 êàíòíûõ batters on square-sawn ïèëîìàòå
rial, as well as square-sawn and unedged boards on square sawn timbers. - Scie circulaire CR-300
For longitudinal cutting of outside plank through-the-thickness. Thereon it is also possible to saw up the thick boards, three and four the êàíòíûé batter on slimmer the saw-timbers and the blanks. - Scie circulaire CU-14
For longitudinal and crosscutting of saw-timber, cuttings, butt-ends
SIF and cutting of sheet and slab materials from wood. - Scie circulaire SAS
For qualitative cutting of plywood and laminated äðåâåñíîâîëîêîííûõ plates . For cutting of sheet material from plastic. - Scie circulaire SAS - 1300M
With coping saw. For qualitative cutting laminated timber shavings and wood fiber boards.
| |
