| No SISTEMA DE INFORMAÇÃO FEDERAL FISinter os consumidores (compradores) têm a possibilidade de introduzir, colocar, complementar e alterar a informação sobre os seus produtos e serviços em tempo real. |
Descrição de artigos/seviços - Maquina de ponto,
está apresentada na abaixo indicada rúbrica FISinter.
Entre na rúbrica e tome conhecimento da descrição pormenorizada das marcas e modificações de artigos/serviços - Maquina de ponto.
-
Materiais e equipamento de soldagem
- Maquina de ponto MRT-3501
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop. - Maquina de ponto MT-1202 UHL4
For resistance spot welding of part from low carbon and íåðæàâåþ
ùèõ steels, as well as cruciform compound of steel rods. Has
the treadle of compression - without pneumatic drive. - Maquina de ponto MT-1202-1 UHL4
For resistance spot welding of part from low carbon and íåðæàâåþ
ùèõ steels, as well as cruciform compound of steel rods. Has
the pneumatic drive of compression. - Maquina de ponto MT-1701
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop. - Maquina de ponto MT-1861
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 18 and can be applied to small workshop. - Maquina de ponto MT-1961
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of fixture to d 20
and can be applied to small workshop. - Maquina de ponto MT-2221
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop. - Maquina de ponto MT-2361
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 18 and can be applied to small workshop. - Maquina de ponto MT-2661
For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 20 and can be applied to small workshop. - Maquina de ponto MTM-207-1
For dotted multiple-electrode welding of planar reinforcing nets from
rods of reinforcing steel of classes of AI, AII, AIII, BI. - Maquina de ponto MTM-303 UHL4
For unwinding, dressings, formings, assemblings and contact welding
reinforcing frameworks from wire by the diameter 5 MM and three of longitudinal
fixtures by the diameter 8 MM, as well as mechanized discharging. - Maquina de ponto MTM-32
For resistance welding of heavy reinforcing nets. With the aim of
reduction once only power consumption aboard
the welding modes in 4 queues and the weld in "chess" procedure are provided. - Maquina de ponto MTN-10001
For resistance spot welding low-frequency current of products from àëþìèíè
åâûõ, heat-resistant and titanium alloys. The application of low-frequency current
allows to reduce the power consumption 1, 5 time. - Maquina de ponto MTPV-01; MTPV-02
For resistance spot welding rectified in secondary current circuit
pages from low-alloyed steel by the depth to 1, 5 MM, as well as welding
SIF of these pages to stiffening elements by the depth to 4, 0 MM. - Maquina de ponto MTV-10001
For resistance spot welding by the rectified current of large from
Delia of responsible appointment from aluminium, titanium and copper joint venture
longwalls, heat-resistant, non-corrosive and low-carbon steels. - Maquina de ponto MTV-8002-1
For resistance spot welding of envelope etc. load-bearing structures from
aluminium, titanium, non-corrosive, heat-resistant and carbon steels
depth to 15 MM, as well as some marks brass and bronze.
| |