Die Erklärung/Inhaltsangabe:Horizontal. For individual sawing with the grain of log with
receipt purpose of saw production in the form of batter, boards (square-sawn and íåîáðå
scorching heat), square sawn timbers.
Die ausführliche Beschreibung der Marke:All tuning and the phases of work in a lathe ãèäðîôèöèðîâàíû.
the machine tool hydraulic drive provides: evening up, rolling over, basing
and log clamp, barrier displacement of band saw,
back and forth motion of portal together with fixed thereon
cutting mechanism, Pila tension and vertical displacement
cutting mechanism.
the cutting mechanism is provided by the device carrier cutting ôðåçó, which
is cut the groove in the course of log and surface soil of wood ahead Pila in
one plane with Pila. Thus, the cutter prevents the meeting
Pila with undesired inclusions ( the dirt, the grit, the ice etc)
the saw process of log stems in case of displacement of rotating Pila
on motionless log.
technical characteristics:
diameter of saw pulleys, MM 900
breadth extreme of band saw blade, MM 100
speed of band saw blade, ì/ñ 30
greatest width of kerf, MM 600
Pila departure (distance from saw blade to beam), MM 570
diameter ðàñïèëèâàåìîãî log, MM
in case of beam-dislocation cutting 100. 1000
in case of circle saw to 1200
length ðàñïèëèâàåìîãî log, MM 1500. 6500
least distance from Pila to base
áðåâíîäåðæàòåëÿ, MM without spacer 75
with spacer 25
greatest vertical travel of saw, MM no less than 935
rotational speed of pulleys of cutting mechanism, îá/ìèí 640
feed speed of cutting mechanism, ì/ìèí. 30
top speed of idle pitch ì/ìèí 45
nominal fluid pressure, MPa 6, 0
hydraulic reservoir volume 126
hydraulic pump type gear
capacity , M. Cuba. /÷àñ 1, 8
(in case of saw in a non-organised way of pine log by the diameter 400ìì, length
6500ìì and feed speed 15 ì/ìèí on blank by the depth 50 MM)
installed capacity, kilowatt 28, 97
clearance, MM (length kh width kh height) 9470 kh 3106 kh 3056
mass, kg 6157 |
