Die Erklärung/Inhaltsangabe:For plastering of wall and overall limitations in case of applying to conventional rock-bottoms (brick, concrete, etc) inside and out premises.
Die ausführliche Beschreibung der Marke:Trim of front surfaces when building the and repair of dwelling and public building.
technical characteristics
compression strength, MPa. 10
colour. Gray
viability solution, no less than, part. 2
application temperature, degree. S. +5 to +35
maximum size of filling agent to, MM. 0, 5
the surface preparation
the ground is to be dry, dust-free, dirt, solution clots, old plaster, residues of ìàñëÿííîé and emulsion paint.
the way of application
the plaster mixture to fall asleep within the reservoir, to add waters at the rate of 1, 8-1, 9 L.. By 10 kg. dry mixture and to stir to homogeneous mass without caking. The prepared solution should be used not later than through 1, 5-2 hrs.. Ïîñëåíà÷àëà the adhesions slightly to moisten the surface, to pack and to equalize. For quick drying to provide the good ventilation.
the material consumption
on average disburses 18-20 the kg. dry mixture by 1 apartment of M. in case of layer thickness 10 MM.
the storage
keeps dry, in fast shut sacks, exclude moisture hit. Storage life in closed sacks 6 months.
packaging
paper bags on 25 kg. 50 kg. |
