Die Erklärung/Inhaltsangabe:For drilling of blasting vertical and directional wells.
Die ausführliche Beschreibung der Marke:The drilling rig tractor ÁÒÑ-150 is intended for drilling of blasting
vertical and tilt (to 30 hails) bore holes by the diameter 150 MM on Glu
Binet to 32 m in rock formations and bore holes by the diameter 200 MM at a depth of
to 11 m in soft and frozen soils.
as a chassis the Ò-170 tractor is used, at which hinged in Chueta
Chueta stops are set weld frame with directing for ïåðåìåùå
contr-loads Nia. The hinge attaching of drilling frame to machine tool îáåñïå÷èâà
ET its slope, which is being carried out by two hydrocylinders. Besides
, the frame is provided by two directing and cardan shaft for moving
and rotator drive, made in the form one-step öèëèíäðè÷åñ
whom gearbox.
gear box mechanical power-operated of òðàêòî
r, two stage, with reverse and shaft of drive of fan.
the machine tool hydraulic system consists of ÍØ-32 pump, oil tank, ãèäðîïàíå
whether and pipeline systems.
the purification system are supplied by compressed air from autonomous compressor
type station of ÍÂ-10.
the machine control in case of drilling is carried out with air operated driller's panel, where
there is the blocking to avoid tractor movement.
technical characteristics:
* main bottom-hole pressure - 150 CN
* working stroke of feeding drum - 2155 MM
* rotational speed of boring becoming - 195 îá/ìèí
* performance of a machine in case of roller-bit drilling - 7, 5 ì/÷
* performance of a machine in case of auger drilling - 10-11 ì/÷
* drilling angle to vertical - to 30 hails
* installed capacity - 114 kilowatts
* clearances into position - 6, 8õ5, 75õ3, 25 m
* clearances in transport location - 6, 15õ3, 8õ3, 25 m
* mass of completely refueled machine tool - 23, 88 t |
Die Bedingung der Lieferung:
| Der Preis: 07.04.2003 cset |
Der Großhandelspreis: 3090000.00 RUR(RUR)
Der Detailpreis: 3090000.00 RUR(RUR) |
| Is issued serial, the delivery is carried out on terms, Ogooue
ðåííûå in each concrete case after 100% prepayment. Âîçì
îæíà the parts delivery. |
|
 |
