Aclaración/resumen:For laying of ceramic, stone or marble flags on coloured,
plastic, wood, ïåíîïîëèñòèðîëüíûå and ãèïñîêàðòîííûå ïîâåðõíî
ñòè, as well on the conventional surfaces from concrete.
Descripción completa de la marca:May áòü is applied on brick and plastered surfaces in
dry and damp locations. Is recommended in dwellings and public
premises for bath, shower rooms , balconies, terraces and premises with
heat-assisted sex.
characteristic:
the glue ANKER-ýëàñòè÷íûé is made on the basis of closely matched
filling agent, hydraulic binding agents and special modifiers. The glue
soundly is transferring temperatural vibrations. The glue of ANKER ìîðîçîñòîåê. Not
contains constituents, bad for healths.
conditioning of road bed:
the solution of ANKER has the high adhesion to all strong surfaces,
dust-free, dirt, limes, butters, fat, wax , residues
dye. For best adhesive bondability plastic and the coloured surfaces
preliminary process by the emery paper to create
roughness; the formed dust is removed and the surface ìîåòñÿ.
the unevennesses more than 5 MM one should the day before to process levelling off
solution of ANKER.
glue preparing:
the glue ïðèãîòîâëÿåòñÿ way of careful mixing with water by hand
or mechanically, in ratio of 0, 22-0, 24 waters l by 1 glue kg to
receipt of dense semifluid censistency.
tools:
electric drill with mixer, steel toothed grater.
technical data:
mixture proportion:
by 1 glue kg 0, 22-0, 24 waters l;
by 1 sack (5 kg) 1, 1-1, 2 waters l;
by 1 sack (25 kg) 5, 5-6 l of water.
creep: 0-2 MM;
open time: 15 mine;
tear strength: 1 Í/ìì2;
serviceable condition: 2 ch;
freezing resistance: 75 cycles;
placeability: very good
ecologically clean. The product was admitted to solar power station use of,. Moscow. |
