Aclaración/resumen:For surfaces of different building constructions: brick concrete, gas-concrete, reinforced concrete, stone, ïåíîïîëèñòèðîëüíûõ. It is possible to utilize as on wet, and on dry ground.
Descripción completa de la marca:The composition represents the granular powder in Elephant-grey, containing no the clots and mechanical impurities. In the composition of surface waterproofer of Ëàõòà the portland cement, the quartz filling agent are included and active polymer chemical agents.
the application technology the surface preparation.
the structural surface should be firm and flat, shall not be permitted the structural damages : cracks, sinks etc. Crack and the conjugations places one should ream at a depth of 2, 5 cm and the width no less than 2 cm and to process Ëàõòîé of resistance. The surface should be freed of dust, dirt and other substances, loosening the solution adhesion to surfaces.
the surface treatment.
the solution is deposited by the brush, platen or spray equipment. Coating depth of surface waterproofer of Ëàõòà 2-4 MM. The strength of waterproof coating are increasing when applying the second layer. In this case after coating of primer no less than 24 hrs.
the technical characteristics has to be spent:
1. Mark on watertight. W12
2. Increase of quality class on watertight in case of layer coating by the depth:
- 2 MM. 1 stage (W12)
- 4 MM. 2 stages (W12)
3. Mark on compression strength, no less than. Ì200
4. Mark on freezing resistance, no less than. F75
5. Cohesive strength with concrete, MPa, no less than. 1, 6
6. Corrosion resistance, pH. 3-13
7. Compensation durability to action of shining
and black products. Gamely
8. Ultraviolet. Does not renders effects
9. Solution viability, hrs.. 2
10. Mobility of mixture. Ïê3
11. Oversize #2, 5, ïðîö. no less than. 2
12. Soil moisture retention capacity, ïðîö. no less than. 98
12. Applicability for reservoirs of drinking water. Shall be allowed
13. Material application. All êëèìàòè÷åñèå
14. Middle material consumption, êã/ì^2. 1, 5
14. Material coating at a temperature of, degree. S. No less than +5
15. Guarantee period of storekeeping, months. 6 |
