L'explication/l'anotation:To protect construction materials from water penetrability, in particular,
for Basseins hermetization, basements, bath and toilet rooms, for z
butts àäåëêè of concrete tiles, cracks and liquidation of leaks.
La description détaillée de marque:The material is used for basements hydraulic insulation,
hydrotechnical building, reservoirs of drinking water and
oil products. Is being applied for both internal, and for external
works at concrete , stone, brick and plastered surfaces.
characteristic:
on the basis of closely matched filling agent,
hydraulic binding agents and special modifiers, giving
material the water-proof properties, the good óäîáîïåðåðàáàòûâàåìîñòü
and the high adhesion to concrete, brick is being manufactured, natural and artificial
stone, to plastered surfaces and gypsum board liners.
provides the watertight of ground and underground reservoirs,
deep elevation head to 70 m of water column.
the material ìîðîçîñòîåê and is not afraid elevated temperatures to +70 degree. S.
possess absolute waterproofness. From contact with water acquire
additional strength. Saline, acid, alkaline
the corrosions and effect of organic matters is free of. Because
material vapour permeability are the same as at brick, condensation
the moisture is not accumulated within the thickness of ground, that excludes its freezing
in conditions of during the winter.
conditioning of road bed:
the ground is to be dry and strong, dust-free, dirt and
other peeling elements. The seams and the cracks to clean and to deepen
for further filling they. Shall not be permitted rule the material on
surface, oil-polluted or fat, coloured by the drying oil or
oil-colour.
preparation:
the container charges to sling within the reservoir and carefully to mix from
calculation 0, 24 - 0, 26 l by 1 kg of dry mixture. To bear 5 mine and once more
to mix.
use:
on prepared the ground one should deposit the waterproof mortar
with the help of brush or spatula, attentively watching for those, in order not
remained bare places, through which can gain access water.
is recommended to rule some layers (to three) depth on 2-3 the MM
each having intermediate exposure of each layer during a day. In case of
coating further layer the coating direction by the brush one shoulds
change. |
