L'explication/l'anotation:To operations on concrete and daubed grounds, for closing of large
cracks and holes.
La description détaillée de marque:Ìîæå to be is applied trim of concrete surfaces under
further the coating of finishing putty of ANKER within dry and wet
premises.
characteristic:
represents the ñðåäíåäèñïåðñíûé öåìåíòîñîäåðæàùèé material with
chemical agents, giving the high-elastic properties and
raising the adhesion to ground. High strength and moisture-resistant, easy
is deposited, ðàçðàâíèâàåòñÿ and are processed by. Contains no constituents,
bad for healths.
conditioning of road bed:
the ground is to be freed of peeling elements, dust,
oil spots and other pollutions. For intensification of adhesion to ground
is recommended to process the surface infiltrating by the composition
ANKER-ïðàéìåð. |
preparation:
the container charges to fall asleep within the reservoir and carefully to mix from
calculation 0, 22-0, 24 waters l by 1 kg of dry mixture. To bear 5 minutes and still
the time to mix.
expenditure:
disburses 25-30 êã/ì2 in case of layer thickness 10 MM.
storage:
to store in fast shut the sacks in dry locations not more 12
months.
technical data:
mixture proportion:
by 1 kg - 0, 22-0, 24 waters l;
by 1 sack (25 kg) - 5, 5-6 water l;
application temperature: from +5 degree. With;
fitness time of solution: 2-3 hour;
layer thickness: to 30 MM.
the product was admitted to use the solar power station,. Moscow. |
Les conditions de fourniture:
| Le prix; de contrat pour kg |
|
|
