L'explication/l'anotation:Semi-automatic, general-purpose. In the manufacture of polymer capacities by the blow method. Primary raw material: polyethylene, polypropylene.
La description détaillée de marque:Main nodes of design:
- device of heating and preparing of product ;
- automated manipulator for blank transfer in the zone of blow;
- the closure mechanism of press moulds.
the semiautomaton consists of two blocs, bonded in monoblock unit and control box. The semiautomaton the pneumatic equipment key companies of manufacturer.
the completing by extrusion heads is equipped with:
- îäíîðó÷üåâàÿ for products from 2 to 10 litres - base enters the delivery set;
- dual-stream for products from 0, 75 to 1, 5 litres - base enters the delivery set;
- òðåõðó÷üåâàÿ for products from 0, 3 to 0, 75 litres - ñïåöçàêàç is outside the delivery set;
- ÷åòûðåõðó÷üåâàÿ for products from 0, 05 to 0, 3 litres - ñïåöçàêàç is outside the delivery set.
technical characteristics:
1. Capacity: for capacities 10 l, state of /÷àñ. 55;
for capacities 1 l, state of /÷àñ. 400;
for capacities 0, 3 l, state /÷àñ. | 800;
2. Working pressure, MPa. 0, 4-0, 6;
3. Air consumption, ì^3/ìèí. 0, 3;
4. Water expenditure, ì^3/÷àñ. 0, 5;
5. Cooling-water temperature, degree. S. 10-12;
6. Supply voltage of three-phase network, V. 380;
7. Installed capacity, kilowatt. 17;
8. Power consumption, kilowatt. 12;
9. Overall dimensions:
length, MM. 3050;
width, MM. 950;
height, MM. 2205;
10. Mass, not more, kg. 1700;
11. Maintenance staff, human being. 1. |
