Schiaramento/annotazione:For tyre ýêñïðåññ-ðåìîíòà.
Descrizione del marchio dettagliata:Represents from itself the fluid on latex foundation, polymerizing because of internal friction in the field of puncture.
it are being applied as means for quick leak-tightness regeneration of chamber and tubeless tires after punctures in the field of protector by objects by the diameter to 4-6 MM . It allows in case of idle time do without spare wheel and promptly to continue the car movement.
after ýêñïðåññ-ðåìîíòà is recommended at the earliest opportunity to repair the tyre in station workshop. If the car movement has proceeded in case of zero inflation pressure, it is strongly recommended that to replace a tyre. T. to is large the damage probability of cord.
in case of considerable damages of tyre or the camera, cuts the leak-tightness regeneration of tyre is not guaranteed.
the way of application.
- soundly âçáîëòíèòå the bottle with gel.
- to screw proposed the lid with conjuctive hose on mouth bottle. The protective foil at the same time automated ïðîêàëûâàåòñÿ.
- to spin off the cap of AND element to unscrew the valve tyre.
- to put on the conjuctive hose on valve pipe tyre.
- to keep the bottle the upside here by the bed and to squeeze out its content within tyre. To take off the hose and to screw the tyre valve in place.
- Ïðèñîåäèíèòå the compressor and íàêà÷àéòå the tyre to pressure 2-2, 5 bar. If the inflation pressure would not pick up (the puncture place is top of tyre), îòñîåäèíèòå the compressor hose and to go by car about 10 meters onward or backwards, in order the gel has fallen into place puncture. After that repeat the process pumping.
- without delay begin to with motion at a rate of not more 80 êì/÷.
- through 10 minutes to check the inflation pressure. If pressure less 1, 3 bars, then the tyre damage is too large, and the tyre hermetization with the help of gel is impossible. If the air pressure in tyre constitutes no less than 1, 3 bars, to bring the pressure to standard and to continue the travel.
the burst tyre at the earliest opportunity one should repair in workshop or replace. |
Condizzioni di fornamento:
|
 |
