Schiaramento/annotazione:Trim of wall surface before stacking of ceramic tiles.
is adequate to use in flats, shower stalls, Basseins and on
ôàñàäàõ.
Descrizione del marchio dettagliata:The application of this solution is specified first of all economic
considerations in those cases, as desired to remove unevennesses
depth more than 5 MM before coating adhesive layer.
characteristic:
on the basis of closely matched filling agent,
hydraulic binding agents and substances, providing high mechanical
the properties is made and good placeability of solution. The solution ìîðîçîñòîåê,
contains no constituents, bad for healths.
surface preparation:
the levelling off solution of ANKER is used in dry and wet
surfaces, produced in brick or concrete,
öåìåíòíî-èçâåñòêîâîé plaster or aerated concrete. This solution impossible
to apply on wood, metal, gypsum and plastic
surfaces. The surface should be hard, dust-free,
dirt, residues of oil and emulsion paint. The surface
is recommended preliminary to damp.
expenditure:
in case of layer thickness 1 MM disburses on average 2, 0 solution kg
by 1 apartment of M..
use:
the solution are placed on the surface with the help of êåëüìû or glabrous
steel grater. Modifier availability, raising the adhesion to
surface, allows to easy "to stretch" the solution over the surface in case of
aid of grater. For best adhesion glue surface composition,
levelled by the solution, it's no use smoothly to scratch. Time, which must
to pas from solution coating up to the moment of pallet adhesion
5 hours for every 1 depth cm levelling off solution makes up.
storage:
in dry conditions in tight packing to store not more 12 months.
technical data:
mixture proportion:
by 1 kg 0, 2-0, 24 waters l;
by 1 sack (25 kg) 5-6 water l;
application temperature: from +5 degree. With;
fitness time of solution: 2-3 hour;
layer thickness: 10-20 the MM.
the product was admitted to use the solar power station,. Moscow. |
Condizzioni di fornamento:
|
|