???????? (? ??????)
Code Page utf-8 		Sistema federale di informazione su merci e servizi
FISinter
Архив подсистемы «Информация производителей продукции»

Scelta della lingua
Ricerca d'informazione
Dettagli
Настройки браузера
Подсистема

Articoli di tubazione ed armatura

tubo termoisolante Izjoproflex - A - tandem


Per questo marchio ci sono delle modificazioni - sceglietele quм di sotto dopo aver preso conoscenza di annotazione con descrizione dettagliato

Schiaramento/annotazione:

Working pressure 10 bar. Dual-pipe. For water feed on inter-block thermal networks for heat water supply and heating, bringing heat losses to a minimum.

Descrizione del marchio dettagliata:

The pipes ÈÇÎÏÐÎÔËÅÊÑ
not are liable to corrosion;
the hydraulic insulations and its associated expenditure do not require;
provide durable and the trouble-free operation of heat exchanger equipment;
more than is long-lived as compared with other lagged pipes, performed by Russia: their life-time in case of observance of operation conditions is measured by the year dozens;
the small weight of pipes ÈÇÎÏÐÎÔËÅÊÑ significantly makes easy their transportation and the assembling;
the pipes flexibility ÈÇÎÏÐÎÔËÅÊÑ allows to pass line tackings without the use of profiled parts;
the unlike other performed by Russia lagged pipes are supplied by long-measured sections (bays), Thanks to what significantly has been shrinking the times and cost assemblies.

pipe ÈÇÎÏÐÎÔËÅÊÑ are intended channelless lying. Are being manufactured in three base cases one-, two- and ÷åòûðåõ-òðóáíîì, allowing of maximally to optimize the building scheme according to appointment and nature line.

internal (feeding) the pipe, is constructed of crosslinked polyethylene - material, highly flexible, chemical resistance and high-temperature strength. Heat insulation from foamed polyurethane. Corrugated the polyethilene shell.

  Modificazioni
numero d'ordineMarchiatura della modificazione
Inter
Nazionale		Pressure pipe c reinforcing by the envelope, MM containment shell, MM mass 1 m, kg minimum bend radius, m maximal length in bight, m
1 25x25/110
25x25/110		25x2, 3+25x2, 3 110x2, 4 1, 72 0, 9 425
2 32x32/125
32x32/125		32x2, 9 125x2, 7 2, 28 1, 0 315
3 40x40/140
40x40/140		40x3, 7+40x3, 7 140x3, 0 2, 98 1, 1 285
4 50x50/160
50x50/160		50x4, 6+50x4, 6 160x3, 2 3, 94 1, 2 150