| Маркировка модификации
Inter
Nat. | Íàèìåíîâàíèå/ characteristic | standard | depth, MM | width, MM | range of applicability, appointment |
| 1 |
 LMcZH57-1.5-0.75
LMcZH57-1.5-0.75 | Cu60, Mn1. 5, Fe0. 75, Zn | the technical specification 48-21-299-84 | 0. 5-1. 5 | 100-120 | the brazing is solid. alloy |
| 2 |
TP-1M
TP-1M | Three-layer Ë-Áð-Ë | technical specification 48-21-731-86 | 0. 4-0. 8 | 110 | brazing |
| 3 |
PMGROB 10-1-0.1
PMGROB 10-1-0.1 | Ge-10. 0, Sn-1. 0, B-0. 1 | technical specification 48-21-628-79 | 0. 07-1. 0 | 100-120 | brazing ýëåêòðîâàê èçä |
| 4 |
LNMc 60-9-5
LNMc 60-9-5 | Cu60, Ni9, Mn5, Zn-îñò. | | technical specification 48-21-299-84 | 0. 5-1. 0 | 100-120 | the brazing is solid. alloy |
| 5 |
PMGrN 10-1,5
PMGrN 10-1,5 | Ge10, Ni1. 5, Cu-îñò. | | technical specification 48-21-628-79 | 0. 1-1. 0 | 100-120 | brazing ýëåêòðîâàê èçä |
| 6 |
PMGrN 5-2.8V
PMGrN 5-2.8V | Ge5, Ni2. 8, Cu-îñò. | | technical specification 48-21-628-79 | 0. 1-1. 0 | 100-120 | brazing ýëåêòðîâàê èçä |
| 7 |
PMGrKr 4-2.5V
PMGrKr 4-2.5V | Ge4, Si2. 5, Cu-îñò. | | technical specification 48-21-628-79 | 0. 1-1. 0 | 100-120 | brazing ýëåêòðîâàê èçä |
| 8 |
PMGrOZHKo10-1-0.1-0.1
PMGrOZHKo10-1-0.1-0.1 | Ge10, Sn1, Fe0. 1, Co0. 1 | technical specification 48-21-628-79 | 0. 01-1. 0 | 100-120 | brazing ýëåêòðîâàê èçä |
| 9 |
LNKoMc 49-9-0,2-0,2
LNKoMc 49-9-0,2-0,2 | Cu49, Ni9, Co, Mn, Znîñò | technical specification 48-21-299-84 | 1. 0-6. 0 | 100-120 | the brazing is solid. alloy |
| 10 |
PrMNMc 68-4-2
PrMNMc 68-4-2 | Cu68, Ni4, Mn2, Zn-îñò. | | technical specification 48-21-674-91 | 0. 5-1. 0 | 100-120 | brazing of hard alloy. èíñòð |
| 11 |
PrANMc 0,6-4-2
PrANMc 0,6-4-2 | Cu68, Ni, Mn, Al, Zn-îñò | technical specification 48-21-674-91 | 0. 5-1. 0 | 100-120 | brazing of hard alloy. èíñòð |
| 12 |
MNMc 60-20-20
MNMc 60-20-20 | Ni-20, Mn-20, Cu-îñò. | | technical specification 48-21-486-75 | 10. 0-15. 0 (0. 65) | 100-120 | the brazing is solid. alloy |
| 13 |
BrKMc 3-1
BrKMc 3-1 | Si-3. 0, Mn-1. 0, Cu-îñò | 16130-90 | 0. 07-2. 0 | 100-120 | manual welding |
| 14 |
LANKMc 75-2-2,5-0,5-
LANKMc 75-2-2,5-0,5- | 0. 5; Cu, Al, Ni, Si, Mn | the technical specification 48-21-630-86 | 0. 1-3. 0 | 100-120 | the brazing is solid. alloy |
| 15 |
MNAHMc 15-3.5-2-3
MNAHMc 15-3.5-2-3 | Ni, Al, Cr, Mn, Cu-îñò. | | technical specification 48-21-306-84 | 0. 08-2. 5 | 100-120 | compressors. part of t=300 |
| 16 |
MNAKH 11-2.5-1.0-0.8
MNAKH 11-2.5-1.0-0.8 | Êàìåëîí, deputy. ÁðÁ2 | technical specification 48-21-629-82 | 0. 05-2. 5 | 100-120 | compressors. part of t=300 |
| 17 |
BrCr 0.2,BrHCr
BrCr 0.2,BrHCr | Zr-0. 2, Cu-îñò. | | technical specification 48-21-30-82 | 0. 5-1. 0 | 100-120 | dems . ýëåòðîâàê. the device |
| 18 |
BrNHK 2.5-0.7-0.6
BrNHK 2.5-0.7-0.6 | Ni, Cr, Si, Cu-îñò. | | technical specification 48-21-672-75 | 0. 8-1. 0 | 100-120 | support ïîäâèæ. contact |
| 19 |
MNMc 3-12
MNMc 3-12 | Ni-3, Mn-12, Cu-îñò. | | Gost 492-73 | 0. 1-3. 0 | 100-120 | electrotechnics |
| 20 |
MN6
MN6 | Ni-6, Cu-îñò. | | technical specification 48-21-800-86 | 1. 0 | 100-120 | íàãð. ýëåì. thermal. relay |
| 21 |
MN23
MN23 | Ni-23, Cu-îñò. | | technical specification 48-21-800-86 | 0. 3 | 100-120 | íàãð. ýëåì. thermal. relay |
| 22 |
MN19
MN19 | Ni-19, Cu-îñò. | | Gost 5187-70 | 0. 1-0. 8 | 24-120 | part Pribe, þâåë èçä |
| 23 |
BrA7
BrA7 | Al-7, Cu-îñò. | | Gost 1048-79 | 0. 1-0. 5 | 50-120 | compressor |
| 24 |
MNMc 40-1.5
MNMc 40-1.5 | Ni-40, Mn-1. 5, Cu-îñò. | | Gost 5189-75 | 0. 1-2. 0 | 50-120 | high. ohmic the DSS |
| 25 |
M 1
M 1 | Cu-99, 9 ties copper | Gost 1173-77 | 5. 0-10. 0, 0. 15-0. 3 | 100-120 | electrotechnics |
