FISinter (to initial point)
Code Page utf-8
Das föderative Informationssystem über Güter und Dienstleistungen
FISinter

Подсистема «Информация производителей продукции»

Wälen Sie die Sparche
Die Suche der Information
Die Unterbringung der Information
Einzelheiten
Настройки браузера
Архив

Nachrichtenmittel, Post- und Kommunikationsausr'stungen

Antennenstütze _________ "Bashnya-2"


Für diese Marke gibt es die Modifikationen - wählen Sie unten nach dem Kennenlernen die Inhaltsangabe und die ausführliche Beschreibung

Die Erklärung/Inhaltsangabe:

For the set of antenna and instrument, subject to servicing and ÿâëÿþùèõñ I by component parts of radio relay links.

Die ausführliche Beschreibung der Marke:

Is installed at manufacturing entities with limited area. the support antenna is used in I-VII wind districts in case of following conditions: - environment temperature from - 50 to +50 degree. With, relative moistures 100% in case of t +25 degree. With case of humidity effect, dew, frost, snow, radiation, grit, dust. note. The Í=42ì osteoarthrosis for usage in VII wind district not is intended for. permissible useful lading weight - 4000 kg. osteoarthrosis represents the steal construction of square section. Osteoarthrosis height 42 meter consists of 6 girders, of which 3 top has parallel section 1400x1400 MM. Three lower girders has variable (from ground to vertex) square section. the osteoarthrosis design by the height from 35 to 14 meters are specified successive exception of lower girders of osteoarthrosis by the height 42 meters. Girder when mounting the are connected weld. To top girder the service aprons 2õ2õ1 are welded, 7 meters having door. to ground of lower girder with the help of fingers 4 stems are fastened, basing on cushion cap. Stem on cushion shall be fastened çààðìèðîâàííûìè in concrete by anchors. Lower girder is being finished by the way welding four longitudinal angles by the 110õ110õ8 and 4 cover-plates.

  Die Modifikation/Spezifikation
Маркировка модификации
Inter
Nat.
Height, m weight, kg overall dimensions, m
1 HG4.115.286
HG4.115.286
42 9700 2, 9 kh 2, 9
2 HG4.115.286-01
HG4.115.286-01
35 7500 2, 4 kh 2, 4
3 HG4.115.286-02
HG4.115.286-02
28 5400 2, 0 kh 2, 0
4 HG4.115.286-03
HG4.115.286-03
21 3700 2, 0 kh 2, 0
5 HG4.115.286-04
HG4.115.286-04
14 2500 2, 0 kh 2, 0