Explanation/Annotation:For laying of wall tiles from ceramic and rock on plastered walls
ACh, concrete, brick and other dry or wet grounds. Presents
Sue by the mortar of wide application. Âîäîóñòîé÷èâ. Ìîðîçîñòî
é÷èâ. |
Detailed model description:Bricklaying work, the surfaces levelling,
filling, defects filling in parget and natural stone
serves for (the optimal layer thickness amount to about 3-5 MM).
characteristic:
is made on the basis of closely matched filling agent,
hydraulic binding agents and special modifiers. The glue of ANKER
ìîðîçîñòîåê. | Contains no constituents, bad for healths.
conditioning of road bed:
the ground is to be firm and smooth, dust-free, dirt,
lime, butters, fat, wax, residues dye. Unevenness less 5 MM
one should the day before to equalize the same solution or levelling off
solution of ANKER. Surface with high absorbing capacity
(for example the brick in dry location) is recommended preliminary
to damp.
glue preparing:
the glue ïðèãîòîâëÿåòñÿ way of careful mixing with water by hand
or mechanically, in ratio of 0, 24-0, 25 waters l by 1 glue kg to
receipt of dense semifluid censistency.
tools:
electric drill with mixer, steel toothed grater.
technical data:
mixture proportion:
by 1 glue kg 0, 24-0, 25 waters l;
by 1 sack (5 kg) 1, 2-1, 25 waters l;
by 1 sack (25 kg) 6, 0-6, 25 waters l;
creep: 0-2 MM;
open time: 15 mine;
tear strength : 0, 8 Í/ìì2
serviceable condition: 2 ch;
freezing resistance: 50 cycles;
placeability: very good.
ecologically clean. The product was admitted to use the solar power station,. Moscow. |
|
