Explanation/Annotation:Electronic. For the transformation of temperature in unitized output direct current signal 4-20 microampere and remote transmission of signal of measurement information other articles.
Detailed model description:Limits transformed temperatures, °Ñ
From - 50 up to 50,
From - 50 up to 150,
From 0 up to 100,
From 0 up to 150
Basic error, % - + 0, 5
Power consumed, watt, not more than - 1
Proof pressure, MPa - 6, 0
Overall dimensions, mm - 90õ50, 5õ165
The length of assembly portion, mm - 160, 250, 320 (is mentioned in case of order)
Mass, kg, not more than - 0, 4
Housing protection - IP65
Is applied to flame-proof electrical equipment of plurality of II according to the state standard 12. 2. 020-76 with type of protection < intrinsically-safe circuit >. Is connected to flameproof inlets of certificated by the test organization of articles, which has the explosion protection marking < ExiallC >. Is marked of explosion protection < chi ÎÅõiàIIÑÒ6 > and are fixed in explosive zones of premises and outdoor installations according to Glu. 7. 3 ÏÓÝ 2000. Controlled mediums: liquide and gases, non-aggressive to steel 08Õ13. Comprises the primary thermoelectric resistive transducer with nominal static characteristic 50Ì according to the state standard 6651-94 and the measuring converter, constructively combined into unified structure. Has the corrector < 0 > (4 microamperes) and < 1 > (20 microamperes)), as well as the protection against misfeed of polarity of supply voltage. Has the joined two-wire line of plugging of load and supply voltage. Ambient-air temperature from - 30 up to 50 °Ñ. The feeding is performed on two-wire circuit from flameproof inlets of certificated by the test organization of articles. Has the certificate ¹ 2003. 056 about compliance to requirement explosion protection. |
