Explanation/Annotation:For packaging of cotton lint.
Detailed model description:The design the press - revolver type C two rotary ïðåññ-ÿùèêàìè and ïðåññ-êàìåðàìè, allowing make at the same time the preliminary densification of fiber and its conclusive pressing.
the presses mechanization provides the load and the preliminary densification of fiber in ïðåññ-ÿùèêàõ, the ïðåññêàìåð tacking and their fixation, the ðïåññêàìåð disclosure after termination of packaging and pushing out of kip from press.
the presses drive - individual pump, the working liquid - the butter of øèäðàâëè÷åñêîå.
main technical details
the nominal effort the press, CN. 5000
nominal effort of rammer, CN. 30
type of rammer. Mechanical
number of rammers on press. 2
moulding pressure, MPa. 9
pressing in number of, êèï/÷. 20
working fluid pressure in the press, MPa. 32
height press above level
sex of ground-floor, MM. 9500
clearances press in plan, MM - from the left to the right. 4880
- ahead backwards. 7450
- height. 12550
mass press, kg. 46500
capacity of main drive, kilowatt. 75. 8
kip clearances, MM: - length. 970+-10
- width. 595+-5
- height. 735+-15
middle mass of kip, kg. 215+-15 |
