Sistema federal de información sobre mercancías y servicios (al inicio)
Code Page utf-8 		Sistema federativo sobre mercancías y servicios
FISinter
Подсистема «Информация производителей продукции»

Selección de idioma
Búsqueda de información
Ubicación de la información
Detalles
Настройки браузера
Архив

Artículos de tubería y armadura

Tubo de aislamiento térmico Izjoproflex - A (standart)


Para esta marca hay versiones - escójalas abajo después de familiarizarse con el resumen y descripció detallada

Aclaración/resumen:

Working pressure 10 bar. For water feed on inter-block thermal networks for heat water supply and heating, bringing heat losses to a minimum.

Descripción completa de la marca:

The pipes ÈÇÎÏÐÎÔËÅÊÑ
not are liable to corrosion;
the hydraulic insulations and its associated expenditure do not require;
provide durable and the trouble-free operation of heat exchanger equipment;
more than is long-lived as compared with other lagged pipes, performed by Russia: their life-time in case of observance of operation conditions is measured by the year dozens;
the small weight of pipes ÈÇÎÏÐÎÔËÅÊÑ significantly makes easy their transportation and the assembling;
the pipes flexibility ÈÇÎÏÐÎÔËÅÊÑ allows to pass line tackings without the use of profiled parts;
the unlike other performed by Russia lagged pipes are supplied by long-measured sections (bays), Thanks to what significantly has been shrinking the times and cost assemblies.

pipe ÈÇÎÏÐÎÔËÅÊÑ are intended channelless lying. Are being manufactured in three base cases one-, two- and ÷åòûðåõ-òðóáíîì, allowing of maximally to optimize the building scheme according to appointment and nature line.

internal (feeding) the pipe, is constructed of crosslinked polyethylene - material, highly flexible, chemical resistance and high-temperature strength.
the heat insulation from foamed polyurethane.
corrugated the polyethilene shell.

  Versiones/????????????
No.Marcación de la versión
Inter
Nac.		Pressure pipe with reinforcing by the envelope, MM containment shell, MM mass 1 m, kg minimum bend radius, m maximal length in bight, m
1 40/75
40/75		40x3, 7 75x2, 0 1, 11 0, 8 1240
2 50/90
50/90		50x4, 6 90x2, 2 1, 57 0, 8 820
3 63/110
63/110		63x5, 8 110x2, 4 2, 28 0, 9 420
4 75/125
75/125		75x6, 8 125x2, 7 3, 01 1, 0 315
5 90/140
90/140		90x8, 2 140x3, 0 3, 97 1, 1 285
6 110/160
110/160		110x10, 0 160x3, 2 5, 36 1, 2 150
7 140/220
140/220		140x12, 7 200x3, 4 8, 29 1, 4 80
8 160/225
160/225		160x14, 6 225x3, 8 10, 80 1, 6 50