Aclaración/resumen:For drilling in stable nonrocky grounds of bore hole for device
boring-filling piles in industrial and civil engineering.
Descripción completa de la marca:The ÑÎ-2 directive is intended for drilling in the stable nonrocky ãðóí
bore holes t by the depth to 30 m and broadened cavity by the diameter to 1600 MM
for device of boring-filling piles in industrial and civil systems
òåëüñòâå.
the ÑÎ-2 directive make it possible well drilling in irrigated
unstable soils under the protection of clay solution.
the device broadened cavity in drilled pit is made tar-paper
to stable dry soils with the help of special widener. Øèðî
the CFU application in industrial engineering found the directive in case of storm
bore holes research institute for device of áóðîíàáèâíûõ foundation piles of Azov anchovy bodies
whom automobile plant.
the ÑÎ-2 directive is mounted on ÄÝÊ-251 crane or other lifting
mechanisms with carrying capacity no less than 25òñ.
the hinged equipment for well drilling includes the pipe support with
directing, according to which carriage electrically-actuated transfers to and î÷èñ òèòåëü.
to driving shaft of electric drive by means of hinge are fastened òåëåñ
êîïè÷åñêàÿ screw boring column with drilling tool for the end
( screw drill, òðåõïåðàÿ tooth crown etc).
in case of well drilling by the depth to 22 m bring the internal section òåëåñ
êîïè÷åñêîé boring column, in case of well drilling at a depth of to 30 âûä m
âèãàþò both the sections of telescopic column.
technical characteristics:
* hole size (piles) - 600 MM
* maximal drilling depth - 30 m
* middle drilling rate in soft ground - 10 ì/÷
* maximal diameter broadened cavity - 1600 MM
* rotational speed of drilling tool - 43 îá/ìèí
* electric motor type of drive - 4À250Ì693
* electric motor capacity - 55 kilowatts
* electric motor voltage - 380 in
* synchronous speed of ýëåêòðîäèâãàòåëÿ - 1000 îá/ìèí
* mass manufactured equipment - 15000 kg
* mass of base machine (ÄÝÊ-251) - 36200 kg
* directive clearances - 23000õ11000õ3200 MM |
Condiciones de suministro:
| Precios: de 07.04.2003 g. por cset |
Precio al por mayor: 972000.00 RUR(RUR)
Precio al por menor: 972000.00 RUR(RUR) |
| Without base machine.
is issued serial, the delivery is carried out on terms, Ogooue
ðåííûå in each concrete case after 100% prepayment. Âîçì
îæíî manufacture of individual parts and units. |
|
 |
