K 617M tipa MSO-1605
* K 617M tipa MSO-1605 | For contact butt weld of product from low carbon, austenitic
and heat resistant steels. The design of a machine allows to weld products
closed-form and the rectilinear products.
|
K-607 tipa MSO-10001
* K-607 tipa MSO-10001 | For contact butt weld of product from aluminium, magnesium and
titanium alloys, heat-resistant and stainless steels, as well as steel
áëþìñîâ with package of aluminium ribbons.
|
K-617 tipa MSO-1603
* K-617 tipa MSO-1603 | For contact butt weld by the continuous pulsed by the melting
products from low carbon, austenitic and heat resistant steels. Allow
ET weld as the rectilinear products, and products of closed-form
|
MSO-100.05
* MSO-100.05 | For butt weld of broad bands by the melting on continuous ìåòàëëóð
ãè÷åñêèõ units.
|
MSO-100.06
* MSO-100.06 | For butt weld of broad bands by the melting in continuous metallurgists
÷åñêèõ units.
|
MSO-100.08
* MSO-100.08 | For butt weld of broad bands by the melting on continuous ìåòàëëóð
ãè÷åñêèõ units.
|
MSO-100.09
* MSO-100.09 | For butt weld of broad bands by the melting on continuous ìåòàëëóð
ãè÷åñêèõ units.
|
MSO-100.11
* MSO-100.11 | For butt weld of broad bands by the melting on continuous ìåòàëëóð
ãè÷åñêèõ units.
|
MSO-101 UHL4
* MSO-101 UHL4 | For contact butt weld by the continuous melting of wire and to
tanks by the diameter of 10 to 20 MM, as well as bars of rectangular form
cross section from low-carbon, alloyed steels and non-ferrous metals.
|
MSO-1205
* MSO-1205 | For butt pipe welding by the diameter to 83 MM and types from different
steels by the cross section 1000-1500 square mm, as well as aluminium and titanium alloys
cross section to 600 square mm.
|
MSO-1207 UHL4
* MSO-1207 UHL4 | For contact butt weld by the continuous melting of steel strips
width 50. 30 MM and depth 1. 6 MM from low-carbon and íèçêîëå
ãèðîâàííûõ steels in the composition of metallurgical units.
|
MSO-1606
* MSO-1606 | For contact butt flash welding of steel strips by the width
50. 400 MM and depth 1, 5. 5 MM from carbonaceous and low-alloyed
steels.
|
MSO-50.01
* MSO-50.01 | For butt weld of broad bands by the melting on continuous ìåòàëëóð
ãè÷åñêèõ rolling mills.
|
MSO-604
* MSO-604 | For pipe welding etc. products of circular section from different steels
cross section to 600. 850 square mm, as well as aluminium and titanium alloys
cross section to 300 square mm.
|
MSO-605
* MSO-605 | For contact butt weld by the continuous melting and melting with
heating of boiler tubes from pearlitic steels by the cross section 800 square mm and modular pneumatic instrumentation system
òåíèòíûõ - of cross section to 600 square mm.
|
P-144
* P-144 | For abutment joint pipes with vitrified and íåîñòåêëîâàííîé internal
surface.
|
P-145
* P-145 | For abutment joint pipes with vitrified and íåîñòåêëîâàííîé internal
surface.
|
PDS-901(p)
* PDS-901(p) | For pressure welding in the air of instrumental, constructive and
other steels without spitting and with minimum residual of äåôîðìà öèåé.
|