L'explication/l'anotation:For mortising and boring of holes in wood wares.
La description détaillée de marque:Peculiarities:
the machine tool has the basing table by the íåïëîñêîñòüþ not more 0, 15 MM, that
provides the stable basing of blanks and the width uniformity
processing the groove;
the location of workplace affords a high degree of safety and the amenity
overseeing transient surface, that increases the possibilities of treatment;
longitudinal and the transversal advance of tool is carried out by the one arm ,
that facilitates the work for the operator;
the rolling guides provide the ease of migration of tools;
the adjustment of finished dimension to be produced on quick resetting
bar stoppers;
the work table may swings (or turns) trough angle +-45 degree
from horizontal, that provide Milling of tilt grooves;
the spindle directive separately with electric motor increases the accuracy
and extend the range of processing;
còàíîê is equipped with blockings of device and gyration of spindle.
the consumers: enterprises furniture makers, products makers from
wood.
technical characteristic:
1. Overall diameter bored hole, MM. 20
2. Inmost depth bored hole
(ôïåçåðóåìîãî groove), MM. 125
3. Length overall milled the groove, MM. 200
4. Least distance from spindle axis to table, MM. 10
5. Greatest distance from spindle axis to table, MM. 130
6. Greatest spindle RPM, îá/ìèí. 4600
7. Angle of incidence of table, degree. - +45
8. Current gender supply line. Variable
. 3 phase
9. Voltage of electrical. Network, V.. 380
10. Installed capacity, kilowatt. 3
12. Overall dimensions, MM. 955õ800õ1440
13. Mass, kg. 380 |
