L'explication/l'anotation:Mulipurpose. For machining of workpiece and frame constructions of wood
windows and áàëêîííûõ doors with double, ternary and ÷åòâåðíûì glazing the time
practical design and åâðîîêíà in small-scale production.
La description détaillée de marque:The centre consists of tenoncutting and milling plots, which are able
to function as a at the same time, and severally. In case of simultaneity
plots blanks under square sawn timbers type of window valves are processed. 00013.
for exception of additional ïåðíàëàäîê, in case of tool change on
other type, is applied block with changeable plates with permanent
diameter of cutting. In case of îáãîíêå of window valves and other frame
designs on external contour on type stipulated tool
work only milling plot. For cleaving exception on products
in case of îáãîíêå of frame constructions the additional spindle with
cutdown milling at the output of blank is applied. After hand loading
centre by the blank all îïåðàçèè: áàçèðîâêà, clamp, submission and îáðàáîòêà-
stem in automated fashion.
in comparison with earlier produced by the ÌÄÖ-21 analogues has the number of
priorities:
- the resource saving operation - the draft fillet carving has been introduced;
- the continuous feed is enacted;
- lengthened the autofeeder beam is applied;
technical characteristics:
square sawn timbers amounts, treated with centre, MM
length 440. 2175
width 40. 120
depth 42. 104
amounts of frame constructions, MM
length 440. 2120
width 445. 1116
depth 42. 78
feed speed, ì/ìèí
on tenoncutting plot 5. 8
on profiling plot 5. 12
rotational speed (spindles diameter), îá/ìèí/ìì
saw 3000/40
milling tenoncutting 3600/40
milling profiling 6000/40
saw cutting 6000/32
number of workers 2
installed capacity, kilowatt 31, 2
overall dimensions, MM 5245 kh 1822 kh 1430
mass, kg 3175 |
