L'explication/l'anotation:Multi-stream. In the manufacture of polymer capacities by the blow method. Primary raw material: polyethylene, polypropylene.
La description détaillée de marque:Main nodes of design: - device of heating and preparation of production; - automated manipulator for blank transfer in the zone of blow; - closure mechanism of compression molds; - structural design - monoblock unit; - the control box. the semiautomaton is equipped with the pneumatic equipment key companies of manufacturer. the completing by extrusion heads: - dual-stream for products from 0, 75 to 1, 5 litres - base enters the delivery set; - òðåõðó÷üåâàÿ for products from 0, 3 to 0, 75 litres - ñïåöçàêàç Is outside the delivery set; - ÷åòûðåõðó÷üåâàÿ for products from 0 , 05 to 0, 3 litres - ñïåöçàêàç is outside the delivery set. the technical characteristics: 1. Automatic machine capacity (for capacities 1, 0 l), state of /÷àñ. 400; 2. Working pressure, MPa. 0, 6; 3. Air consumption, ì^3/ìèí. 0, 3; 4. Water expenditure, ì^3/÷àñ. 1, 5; 5. Water temperature, degree. S. 10-12; 6. Installed capacity, kilowatt. 13; 7. Power consumption, kilowatt. 8; 8. Overall dimensions: length, MM. 2700; width, MM. 980; height, MM. 2235; 9. Mass, not more, kg. 1800; 10. Maintenance staff, human being. 1. |