Schiaramento/annotazione:Quick-setting. To halt water leaks in concrete, brick
and masonry.
Descrizione del marchio dettagliata:Characteristic:
on the basis of closely matched filling agent,
hydraulic binding agents and special modifiers, giving
material the water-proof properties, the good óäîáîïåðåðàáàòûâàåìîñòü
and the high adhesion to concrete, brick is being manufactured, natural and artificial
stone. The adhesion time of mixture makes up 1, 5-2 minute. The material
allows to promptly, tightly and securely to fix live leaks in concrete,
stone and bricklaying work.
conditioning of road bed:
the ground is to be refined from dirt and other peeling
elements. The seams and the cracks to clean and to deepen for further them
filling in. Hole, of which beats the water jet, it is necessary
to bung tissue, wood or other cork so as to its territories
1-2 refer to was staying.
preparation:
the container charges to sling in bucket and carefully
to mix with water at the rate of 40 waters magnetic tapes on 100 years of dry mixture.
the adhesion of such solution comes through 1-1, 5 mine, therefore one should
to prepare it so much is equal to, how much it is necessary for liquidation of one leak.
use:
by hand to form seal in compliance with hole configuration.
to patch up the hole this seal and to keep of it, ïðèæàâ, during 1-2
minutes. After leak liquidation it is necessary to carry out works at
hydraulic insulation by the material "the water-proof mixture of ANKER" or it
analogue.
attention:
the mixture application is not of full value substitution water-proof
works using of special insulating compositions. The mixture
is intended for only for quick temporary liquidation of water leaks.
storage:
to store in hermetically closed the distinctive package in dry cool
place not more 3 months.
technical data:
mixture proportion: on 100 years - 40 waters magnetic tapes;
ground temperature: from +5 degree. With;
adhesion time of solution: 1, 5-2 mine;
time of conclusive solidification of water-proof seal: 3 days;
water absorption: not more 20 %.
the product was admitted to use the solar power station,. Moscow |
Condizzioni di fornamento:
|
|
