Explicação, anotação:With CNC. for manifold processing in conditions of serial and ìåëêîñåðèéíî
production ãî of parts and blanks from ferrous and nonferrous metals and them
alloys, as well as drilling cuts and boring.
Descrição porminorizada da marca:The machine tool it is necessary to press into the service of exact and clean works. The processing
parts are accomplished by vertical milling spindle. The machine tool is equipped with
electric drive and numerical program control facility of siemens ag of model. SINUMERIC 810D. The work in
automatic mode allows to produce the processing at the same time on
three coordinates (x, Y, Z) c of use of linear and circle
interpolation under the programme, dialled with desk or loaded with
external program medium. Under order the machine tool can be equipped with
the round table with Directorate from numerical program control facility.
quality class according to the state standard 8-82. "p"
amounts of writing surface of vertical table, MM. 250õ500
amounts of writing surface of horizontal table, MM. 320õ630
greatest programmable displacements, MM, no less than:
longitudinal (coordinate axis of kh). 380
transversal (coordinate axis Z). 300
vertical (coordinate axis of Y). 360
size of working programmable submissions, ìì/ìèí (x, Z, *Y) 3. 5000;
*3. 2500
range of spindle RPM, îá/ìèí. 45. 3000
shanks type of tool mandrels -
- Gosts 25827 (use 2); DIN 69871/A+AD; ISO 7388/1
øòðåâåëÿ type - Gost 27788 (type a); DIN 69872 ( type a); ISO 7388/2 (type a)
nests number of tool mandrels. 24
capacity of main drive, kilowatt. 2, 2
overall dimensions, MM. 2115õ1356õ2150
mass, kg, not more. 1800 |
