Explicação, anotação:For conditioning of road bed under painting, entire wheat, face works hv
óòðè premises with normal amount of moisture, including kitchen and bath dishwater
ùåíèÿ of dwelling building.
Descrição porminorizada da marca:For any types of surface - concrete, stone, brick,
wood.
characteristic:
represents the âûñîêîàäãåçèîííóþ plaster on the basis of gypsum
astringent and nonorganic microfillers. Gypsum plaster
the solution makes it possible to receive absolutely the smooth surface, which not
need additional filling before further works and
has the short period of drying.
surface preparation:
the surface should be dry and hard, dust-free , butters and
other pollutions of organically derived. Strongly absorbing
surface one should to process prime coating of ANKER-ïðàéìåð.
plaster preparing:
dry plaster mixture is combined with pure water to homogeneous
state in ratio of 7, 5-8, 5 l by 15 kg of dry mixture. The solution
is being held 5 mine, then again are mixed. After that the mixture
is ready for work. Received the mixture can be used in two
hours at a temperature of +20 degree. S.
coating:
the mortar for plastering inflict at the surface the single-skin and ðàçðàâíèâàþò. |
optimal layer thickness - 10 MM (minimum - 8 MM). Through 45-60
minutes after solution coating (initial set) the surface
process by the wide spatula, and hereinafter through 15-20 minutes overwrite
spongy grater, abundantly moistened with water and çàãëàæèâàþò metal
spatula, receiving absolutely smooth surface.
expenditure:
the expenditure of dry plaster mixture makes up 8-9 the kg by 1 sq. m in case of
layer coating 10 MM.
storage:
the sacks with gypsum plaster mixture keep in dry place on wood
blanket. Storage life not more 6 months.
technical data:
mixture proportion:
by 1 kg - 0, 52-0, 55 waters l;
by 1 sack (15 kg) - 7, 5-8, 5 waters l;
ground temperature: from + 50 hails to + 30 ãðàäÑ;
fitness time of solution: 1 ch;
layer thickness: 10 MM.
the product was admitted to use the solar power station,. Moscow. |
