Explicação, anotação:For cost of ceramic, stone and stove tile wall-mounted
kh and ïîëàõ in dry, wet and wet premises. Joint gap width to 6 MM.
Descrição porminorizada da marca:Characteristic:
is made on the basis of closely matched filling agent,
hydraulic binding agents and special modifiers. The material
ìîðîçîñòîåê. | Contains no constituents, bad for healths.
conditioning of road bed:
the ground under seams rubbing is to be uniform deep, refined
from dirt and dust. The seams on grounds of large absorbability one should
preliminary to wet with water. Immediately after tile paving it is necessary begin to with
the seams preparing, cleaning up them from adhesive solution. The seams rubbing it is possible
to begin with after solution hardening, at which are laid the pallets, but not
earlier than through 24 hrs.. Ground temperature from +5 degree. With
to +25 degree. S.
solution preparing:
by 1 kg of dry mixture to add about 0, 28-0 , 32 l (for Belaya mixture) or
0, 36-0, 4 l (for colour mixtures) pure water and carefully to billet
by hand or mechanically to receipt of homogeneous and evenly
coloured mass without clots. The water overdose reduces strength
showings of çàòèðî÷íîãî solution. The prepared solution to retain by 5
mine and proximately repeatedly to billet. The solution is adequate to application in
the course 1 hour after addition of water.
expenditure:
solution expenditure in thickness dependence of pallets, width and depth of seam
about 0, 5 - 1, 5 êã/ of apartment of M..
seams rubbing:
for ease of purification of íåãëàçóðîâàííîé pallet after rejointing,
the tablet before jointer it is necessary to damp. Is recommended
preliminary to check, the pallets by the pigment not îêðàøèâàþòñÿ whether,
containing in solution (for íåãëàçóðîâàííûõ pallets) . The rubbing
is installed to tablet by diagonal movements by the spatula, and then
is tightened in seams to full filling they, the excesses is removed. The seams
are drying up during 15-30 mine in temperature dependence and moisture.
in dry locations the seams after rubbing it is necessary to damp through
some hrs..
technical data:
joint gap width: to 6 MM;
ground temperature: from +5 degree. With to degree. With;
solution proportion: 0, 28-0, 32 (for Belaya) and 0, 36-0, 40 ( for colour) l
water by 1 kg;
fitness time of solution: about 1 hour.
the product was admitted to solar power station use,. Moscow. |
