Sistema de Informação Federal
Code Page utf-8 		Sistema federativo informativo sobre produtos e serviços
FISinter
Подсистема «Информация производителей продукции»

Escolha da língua
Busca da informação
Colocação da informação
Porminores
Настройки браузера
Архив

Tubos e armadura

tubo de isolação térmica Izjoproflex - A (usilennyi)


Para esta marca existem modificações - pode escolhe-las em baixo, apуs conhecer a anotação e descrição porminorizada

Explicação, anotação:

Working pressure 10 bar. For water feed on inter-block thermal networks for heat water supply and heating, bringing heat losses to a minimum.

Descrição porminorizada da marca:

The pipes ÈÇÎÏÐÎÔËÅÊÑ
not are liable to corrosion;
the hydraulic insulations and its associated expenditure do not require;
provide durable and the trouble-free operation of heat exchanger equipment;
more than is long-lived as compared with other lagged pipes, performed by Russia: their life-time in case of observance of operation conditions is measured by the year dozens;
the small weight of pipes ÈÇÎÏÐÎÔËÅÊÑ significantly makes easy their transportation and the assembling;
the pipes flexibility ÈÇÎÏÐÎÔËÅÊÑ allows to pass line tackings without the use of profiled parts;
the unlike other performed by Russia lagged pipes are supplied by long-measured sections (bays), Thanks to what significantly has been shrinking the times and cost assemblies.

pipe ÈÇÎÏÐÎÔËÅÊÑ are intended channelless lying. Are being manufactured in three base cases one-, two- and ÷åòûðåõ-òðóáíîì, allowing of maximally to optimize the building scheme according to appointment and nature of line.

pipe with strengthened by the insulation type districts with negative annual average outside air temperature.

internal (feeding) the pipe are intended for, is constructed of crosslinked polyethylene - material, highly flexible, chemical resistance and high-temperature strength. Heat insulation from foamed polyurethane. Corrugated the polyethilene shell.

  Modificação /????????????
?Marcação de modificação
Inter
Nac.		Pressure pipe with reinforcing by the envelope, MM containment shell, MM mass 1 m, kg minimum bend radius, m maximal length in bight, m
1 25/75
25/75		25x2, 3 75x2, 0 0, 90 0, 7 1240
2 32/75
32/75		32x2, 9 75x2, 0 0, 98 0, 7 1240
3 40/90
40/90		40x3, 7 90x2, 2 1, 39 0, 8 820
4 50/110
50/110		50x4, 6 110x2, 4 1, 98 0, 9 420
5 63/125
63/125		63x5, 8 125x2, 7 2, 68 1, 0 315
6 75/140
75/140		75x6, 8 140x3, 0 3, 45 1, 1 285
7 90/160
90/160		90x8, 2 160x3, 2 4, 56 1, 2 150