Explicação, anotação:Part of technological line on preparing of ceramic mass and production of high-quality face brick, tiles and drain pipes.
Descrição porminorizada da marca:Using in technological line on brick production of ãëèíîðàñòâîðèòåëÿ, homogeneity of clay mixture with included in it by additions (the fireclay, the grit, the slags) is obtained, 00027, that decreases the clay shrinking in case of drying, burning and prevents the product from deformation.
the operating principle of ãëèíîðàñòâîðèòåëÿ.
Ãëèíîìàññà shall be submitted on top through bin in cup, where it is captured by paddles of rotating impeller, is mixed and is mixed to cleaning ðåøåòêàì, stipulated on outer diameter cup. The impeller knives ïðîòèðàþò the mass through an opening of gratings. Ãëèíîìàññà, threadbare through an opening of gratings, tray fall on, which is rotated in ñòðîíó, contrarotating of impeller, thanks to what the smooth layer of mass is created concerning, which íîæîì-ñáðàñûâàòåëåì is rejected on creeper or into others feeding device.
on ãëèíîðàñòâîðèòåëå a possibility is provided of mass selection at the same time in one or two places. Availability of preventive cut off finger on driven pulley and the possibility of remote control of ãëèíîðàñòâîðèòåëåì do not require ðàáî÷åãî-îïåðàòîðà.
Ãëèíîðàñòâîðèòåëü consists of main assembling units:
1. Impeller drive of ãëèíîðàñòâîðèòåëÿ
2. Gearbox with tray
3. Cup
4. Bin
5. Lubrication system
6. Drive trays
7. Impeller
1. The impeller drive of ãëèíîðàñòâîðèòåëÿ consists of vertical installed engine, centrifugal clutch and vee-belt transmission.
2. On ÑÌÊ ãëèíîðàñòâîðèòåëå 530 gyrations is transacted through original cylindrical gearbox, fulfilments in iron cast casing.
3. The tray being by the collection of processed ãëèíîìàññû consists of disc and toothed rim.
4. The cup consists of chassis earth of gratings and overhead guard. The cup body represents the welding cylinder, toughened on the outside flanges and ribs. |
