Sistema de Informação Federal
Code Page utf-8 		Sistema federativo informativo sobre produtos e serviços
FISinter
Подсистема «Информация производителей продукции»

Escolha da língua
Busca da informação
Colocação da informação
Porminores
Настройки браузера
Архив

Aparelhos de controle e regulação, convertores

rele de tempo MT1


Para esta marca existem modificações - pode escolhe-las em baixo, apуs conhecer a anotação e descrição porminorizada

Explicação, anotação:

Electronic. For formation of time delays in the range between 100 International Standards up to 999 hr in the composition of different devices of local systems of control of technological processes.

Descrição porminorizada da marca:

The readout start of time delay can be made in one of mentioned conditions of: - in case of power-up of appliance - on outer control channel - on internal triggering with keyboard. Executive state of time delays: - autogenerator; - autogenerator with task of periodicity; - delayed waiting the univibrator; - renewed activity delay of command channel; - waiting the univibrator; - as a program off-state; Discreteness of indication and setup of job, unit. Range 1 fundamental absolute error of arrangment of time delay, with. +15  10-5  ton 0, 0125; where ton - installed the time delay, distinct per seconds. Supply voltage of appliance, in 220 - 15 10% or 12 - 10 15%; Power frequency, Hz 50 (60) Power consumed, ÂÀ, 8 Overall dimensions, mm 76 chis 35 chis 76, 5. Device mass without sensor, kg 0, 22 Housing protection - IP20; front panel - IP44; Arrangment plurality on resistance to sinusoidal vibration - M2. Assembly type - shield. Working position of appliance - horizontal. Environmental category of ÓÕË. 1, but for the operation in the temperature range from - 20 up to 50 °Ñ. Is recommended to use instead the time relay of overhead line type, aircraft and them by the similar. Two level access to programming controlled by the parameter system with function of passworded access provides for; sound and light alarm; programmed determination of front starting pulse; separate adjustment of duration of pause and pulse; display on remainder indicator of time on active phase in the condition of counterclockwise reading; status auto backup of system in case of power dump.

  Modificação /????????????
?Marcação de modificação
Inter
Nac.		Range. Inlet. Control. Íàïðÿæ. Readout starting, inType of executive elementThe flow switched execute. Member in case of cosContact typePre. Switching stress on commands. Signal
1 MT1-1
MT1-1		From 185 up to 242 in changes. FlowElectromechanics. Relay (dry êîíò.10 and (0, 25 a)P242 in or =28 in
2 MT1-2
MT1-2		From 185 up to 242 in changes. FlowÎïòîòðàíçèñòîðíûé driver50 microamperesP=27 in
3 MT1-3
MT1-3		From 185 up to 242 in changes. FlowÎïòîñèìèñòîðíûé driver50 microamperes (1À)But242 in
4 MT1-4
MT1-4		From 4, 5 up to 26 in ïîñòîÿí. FlowElectromechanics. Relay (dry êîíò.10 and (0, 25 a)P242 in or =28 in
5 MT1-5
MT1-5		From 4, 5 up to 26 in ïîñòîÿí. FlowÎïòîòðàíçèñòîðíûé driver50 microamperesP=27 in
6 MT1-6
MT1-6		From 4, 5 up to 26 in ïîñòîÿí. FlowÎïòîñèìèñòîðíûé driver50 microamperes (1À)But242 in
7 MT1-7
MT1-7		From 185 up to 242 in changes. FlowElectromechanics. Relay (dry êîíò.10 and (0, 25 a)P242 in or =28 in
8 MT1-8
MT1-8		From 185 up to 242 in changes. FlowÎïòîòðàíçèñòîðíûé driver50 microamperesP=27 in
9 MT1-9
MT1-9		From 185 up to 242 in changes. FlowÎïòîñèìèñòîðíûé driver50 microamperes (1À)But242 in
10 MT1-10
MT1-10		From 4, 5 up to 26 in ïîñòîÿí. FlowElectromechanics. Relay (dry êîíò.10 and (0, 25 a)P242 in or =28 in
11 MT1-11
MT1-11		From 4, 5 up to 26 in ïîñòîÿí. FlowÎïòîòðàíçèñòîðíûé driver50 microamperesP=27 in
12 MT1-12
MT1-12		From 4, 5 up to 26 in ïîñòîÿí. FlowÎïòîñèìèñòîðíûé driver50 microamperes (1À)But242 in