Sistema federal de información sobre mercancías y servicios (al inicio)
Code Page utf-8 		Sistema federativo sobre mercancías y servicios
FISinter
Подсистема «Информация производителей продукции»

Selección de idioma
Búsqueda de información
Ubicación de la información
Detalles
Настройки браузера
Архив

Artículos de tubería y armadura

Tubo de aislamiento térmico Izjoproflex (usilennyi)


Para esta marca hay versiones - escójalas abajo después de familiarizarse con el resumen y descripció detallada

Aclaración/resumen:

Working pressure 6 bar. For water feed on inter-block thermal networks for heat water supply and heating, bringing heat losses to a minimum.

Descripción completa de la marca:

The pipes ÈÇÎÏÐÎÔËÅÊÑ
not are liable to corrosion;
the hydraulic insulations and its associated expenditure do not require;
provide durable and the trouble-free operation of heat exchanger equipment;
more than is long-lived as compared with other lagged pipes, performed by Russia: their life-time in case of observance of operation conditions is measured by the year dozens;
the small weight of pipes ÈÇÎÏÐÎÔËÅÊÑ significantly makes easy their transportation and the assembling;
the pipes flexibility ÈÇÎÏÐÎÔËÅÊÑ allows to pass line tackings without the use of profiled parts;
the unlike other performed by Russia lagged pipes are supplied by long-measured sections (bays), Thanks to what significantly has been shrinking the times and cost assemblies.

pipe ÈÇÎÏÐÎÔËÅÊÑ are intended channelless lying. Are being manufactured in three base cases one-, two- and ÷åòûðåõ-òðóáíîì, allowing of maximally to optimize the building scheme according to appointment and nature of line.

pipe with strengthened by the insulation type districts with negative annual average outside air temperature.

internal (feeding) the pipe are intended for, is constructed of crosslinked polyethylene - material, highly flexible, chemical resistance and high-temperature strength. Heat insulation from foamed polyurethane. Corrugated the polyethilene shell.

  Versiones/????????????
No.Marcación de la versión
Inter
Nac.		Pressure pipe, MM containment shell, MM mass 1 m, kg minimum bend radius, m maximal length in bight, m
1 25x2,3
25x2,3		75x2, 0 0, 90 0, 7 1240
2 32/75
32/75		32x2, 9 75x2, 0 0, 98 0, 7 1240
3 40/90
40/90		40x3, 7 90x2, 2 1, 39 0, 8 820
4 50/110
50/110		50x4, 6 110x2, 4 1, 98 0, 9 420
5 63/125
63/125		63x5, 8 125x2, 7 2, 68 1, 0 315
6 75/140
75/140		75x6, 8 140x3, 0 3, 45 1, 1 285
7 90/160
90/160		90x8, 2 160x3, 2 4, 56 1, 2 150