???????? (? ??????)
Code Page utf-8 		Sistema federale di informazione su merci e servizi
FISinter
Подсистема «Информация производителей продукции»

Scelta della lingua
Ricerca d'informazione
Disposizione d'informazione
Dettagli
Настройки браузера
Архив

Articoli di tubazione ed armatura

tubo termoisolante Izjoproflex (usilennyi)


Per questo marchio ci sono delle modificazioni - sceglietele quм di sotto dopo aver preso conoscenza di annotazione con descrizione dettagliato

Schiaramento/annotazione:

Working pressure 6 bar. For water feed on inter-block thermal networks for heat water supply and heating, bringing heat losses to a minimum.

Descrizione del marchio dettagliata:

The pipes ÈÇÎÏÐÎÔËÅÊÑ
not are liable to corrosion;
the hydraulic insulations and its associated expenditure do not require;
provide durable and the trouble-free operation of heat exchanger equipment;
more than is long-lived as compared with other lagged pipes, performed by Russia: their life-time in case of observance of operation conditions is measured by the year dozens;
the small weight of pipes ÈÇÎÏÐÎÔËÅÊÑ significantly makes easy their transportation and the assembling;
the pipes flexibility ÈÇÎÏÐÎÔËÅÊÑ allows to pass line tackings without the use of profiled parts;
the unlike other performed by Russia lagged pipes are supplied by long-measured sections (bays), Thanks to what significantly has been shrinking the times and cost assemblies.

pipe ÈÇÎÏÐÎÔËÅÊÑ are intended channelless lying. Are being manufactured in three base cases one-, two- and ÷åòûðåõ-òðóáíîì, allowing of maximally to optimize the building scheme according to appointment and nature of line.

pipe with strengthened by the insulation type districts with negative annual average outside air temperature.

internal (feeding) the pipe are intended for, is constructed of crosslinked polyethylene - material, highly flexible, chemical resistance and high-temperature strength. Heat insulation from foamed polyurethane. Corrugated the polyethilene shell.

  Modificazioni
numero d'ordineMarchiatura della modificazione
Inter
Nazionale		Pressure pipe, MM containment shell, MM mass 1 m, kg minimum bend radius, m maximal length in bight, m
1 25x2,3
25x2,3		75x2, 0 0, 90 0, 7 1240
2 32/75
32/75		32x2, 9 75x2, 0 0, 98 0, 7 1240
3 40/90
40/90		40x3, 7 90x2, 2 1, 39 0, 8 820
4 50/110
50/110		50x4, 6 110x2, 4 1, 98 0, 9 420
5 63/125
63/125		63x5, 8 125x2, 7 2, 68 1, 0 315
6 75/140
75/140		75x6, 8 140x3, 0 3, 45 1, 1 285
7 90/160
90/160		90x8, 2 160x3, 2 4, 56 1, 2 150