Explicação, anotação:Ñóïåðóíèâåðñàëüíûé, cantilever. For carring-out of milling, ñâåðëèëüíî-
boring and thread cutting works. There may be the workpiece machining of different
form from any materials.
Descrição porminorizada da marca:Constructive characteristics: the different automated cycles of work, àâòîì
àòèçèðîâàííàÿ the assemblies lubricant and the individual lubricant of directing, ìåõàíè
çèðîâàííîå the tool clamping in horizontal spindle, the IR mechanism
îïîðöèîíàëüíîãî slowdown of submission, the electro-magnetic coupling of Directorate p
assemblies ðåìåùåíèÿìè, the restriction device of clearance in screw pair ïðîäîë
üíîãî pitch the mechanical safety clutch of protection of feeding drive on
reloadings t, the electro-magnetic coupling of braking of horizontal øïèíäåë
I in case of stop.
univerasl milling head, established in ïîâîðîòíî-âûäâèæíîì kh
îáîòå, allows to machine a part under any angle in longitudinal the flat
table spinule, this the head are equipped with individual gear box with electric
åêòðîïðèâîäîì. The head spindle has mechanical and hand feed. Íàëè
whose the horizontal spindle allows the use of machine tool, as conventional
horizontal-mill. At the same time the trail is turning on 180 ãðàäóñî
V.. There may be the simultaneous processing by two spindles.
it is possible to utilize dividing and slotting heads, rotary roundly
the table ãî, modification on voltage and power frequency.
engineering potentialities: automation of treatment, wide d
èàïàçîí of spindle RPM and feeds of table, high speed is quickly
displacements ûõ of assemblies, high ïðîèçâîäèòåëüíîññòü, reliability and äîëãîâå÷ íîñòü.
the greatest mass workpiece with fixture, establish
ûì in a lathe, êã-400.
overall dimensions of machine tool, MM
- äëèíà-2880
- øèðèíà-1965
- âûñîòà-2370
machine tool mass with electric equipment, êã-3500 |
